| Name |
Specifications |
Relative density（20℃/4℃）
Light-refraction rate（20℃）
Dry substance（W/W）
PH value
Dust content
Dust content
As
Solubility
|
1.260-1.300
1.4535±0.0002
64.5%-67.0%
4-7
≤ 1mg/ml
≤ 5ug/ml
≤ 0.5ug/ml
Mix
|
Product description:
Anti-oxidant for storage battery manufactured by Tianjin Guigu Science & Technology Development Co. Ltd is made from the natural plants extraction. It has a good effect of water-retentive and anti-oxidation therefore it can be used as the substitute for the widely-used anti-oxidants currently such as glycerol, salicylic acid and boracic acid etc. Our anti-oxidant is characterized of low cost, steady effect, strong anti-oxidation capacity and excellent charge and discharge performances etc. Especially under low temperature, dry-charged plates after being xylitol-processed are very consistent and steady. They are a very effective anti-oxidant which is easy to dry after soaking and easy to be applied evenly after drying. It is eco-friendly to use xylitol anti-oxidant because it overcomes the contamination to human body and environment thoroughly.
xylitol anti-oxidant has been put into use for years. Baoding Jin Fengfan Storage Battery Co. Ltd and many other manufacturers have already used xylitol anti-oxidant massively.
How to use:
The application of xylitol anti-oxidant has the same suggested amount and technological process as that of glycerol. Mix the xylitol anti-oxidant with pure water at the rate of 8%-9% and the mixed liquid has a density of 1.02—1.04g/ml.
Other related information:
Xylitol-based anti-oxidant for storage battery:
It is necessary to anti-oxidize the surface of lead-acid battery plates before storage in order to increase the stability of the plate. Xylitol-based anti-oxidant for storage battery manufactured by Tianjin Guigu Science & Technology Development Co. Ltd is an effective post-treatment material.
Advantages of xylitol application on the production of storage battery:
- It is unnecessary to heat the soaking liquid up during the blending and application process in four seasons all year round or to heat after air-dry. It can go to the dying channel directly.
- No subsidiary materials such as salicylic acid or alcohol are needed in the soaking liquid for the plates.
- The soaking time of plates has been reduced. It takes 30 minutes for plates in boracic acid soaking liquid while it only takes 15 minutes in xylitol soaking liquid.
- Compared to boracic acid, xylitol can form a better protection layer to protect the plates from being oxidized thus extend the life of battery.
Making soaking liquid with xylitol is ecological-friendly because xylitol is pure plant extraction without acid or alkali.
